Ingress Protection Certification

Service Details:

 CDG can provide Accredited ‘ingress protection’ Certification.

Many products undergo a variety of tests before they reach the market. These tests include product safety testing, electromagnetic compatibility, vibration testing and many others. Ingress Protection testing, or IP testing, tests a product’s ability to protect against “ingress,” that is, the infiltration of water, dust and foreign objects. Some of the standards related to IP testing are MIL-STD-810 (Military), RTCA/DO-160 (Radio Technical Commission for Aeronautics), and IEC 60529 (International Electrotechnical Commission). Different products require different levels of testing and different types of testing. Generally, ingress protection is divided into testing for ingress from foreign objects or liquids.

The degree of protection offered by an enclosure is shown by the letters IP (Ingress Protection) and two indexes. The first index indicates two factors (protection for persons and equipment), the second index indicates only one factor (protection against water).

Ingress Protection (IP) Test Certification

 CDG can provide Accredited ‘ingress protection’ Certication.

Ingress Protection forms part of the process of determining the level of protection provided by equipment enclosures. The test methods and definitions of the Ingress Protection (IP) Codes are covered under the EN 60529, EN60598 and EN60079-0 Standards.

The ingress protection offered by enclosures should consist of the following:

Protection of persons against access to hazardous parts.

Protection of equipment inside the enclosures to ingress of solid foreign objects.

Protection of equipment in the enclosures against harmful effects due to the ingress of water.

The dust chamber provides ingress testing to the dust-protected (IP5X) and dust-tight (IP6X) categories, by applying a turbulent talc test with reduced pressure to the equipment to simulate cooling down (where applicable).

First digit: 6

Definition: Dust must not enter at all.Test conditions: The test is carried out in a dust chamber in which talcum powder is being kept suspended in the air by means of a dust distributor or similar device. The enclosure which is being tested is placed in the test chamber while a vacuum pump keeps the pressure in the enclosure below the atmospheric pressure of the environment according to the standard.Conditions for acceptance: The protection is satisfactory if there is no visible dust deposit within the enclosure after completion of the test.

Second digit: 5

 Definition: Water jets directed at the enclosure from any direction must not have any harmful effects. IP X5

 Test conditions: A jet nozzle with an inside diameter of 6.3 mm splashes a volume flow of 12.5 litres per minute from a distance of 2.5 - 3 meters from all sides onto the enclosure. The test time is 3 minutes.Conditions for acceptance: Should water have penetrated, it must not

- be present in quantities which impair the good working order of the operating material or represent a safety hazard;- deposit on non-conducting parts where it could lead to creep currents;- come in contact with live parts or coils which are unsuitable for operating in wet conditions;- collect near the wire end or possibly penetrate the wire.

Service Details:

CDG is a leading ‘Ingress Protection Testing’ company in India, contact us for ‘Ingress Protection Testing Services’.

IP67 equipment is the most commonly found in the connectivity market.  It is 100% protected against solid objects like dust and sand, and it has been tested to work for at least 30 minutes while under 15cm to 1m of water. 

Ingress Protection Testing

 

Ingress Protection testing, or IP testing, tests a product’s ability to protect against “ingress,” that is, the infiltration of water, dust and foreign objects. Evaluate the Degree of Protection Provided by a Product’s Enclosure with Ingress Testing from CDG. CDG is a leading ‘Ingress Protection Testing’ company in India, contact us for ‘Ingress Protection Testing Services’.

First digit: 6Definition: Dust must not enter at all.Test conditions: The test is carried out in a dust chamber in which talcum powder is being kept suspended in the air by means of a dust distributor or similar device. The enclosure which is being tested is placed in the test chamber while a vacuum pump keeps the pressure in the enclosure below the atmospheric pressure of the environment according to the standard.Conditions for acceptance: The protection is satisfactory if there is no visible dust deposit within the enclosure after completion of the test.

Second digit: 7Definition: Water must not be allowed to enter in a quantity which causes damage when the enclosure is temporarily under water. IP X7Test conditions: In the test, the enclosure is completely immersed in water in a dip tank. Immersion depth: 1 meter; test time: 30min.Conditions for acceptance: Should water have penetrated, it must not

- be present in quantities which impair the good working order of the operating material or represent a safety hazard;- deposit on non-conducting parts where it could lead to creep currents;- come in contact with live parts or coils which are unsuitable for operating in wet conditions;- collect near the wire end or possibly penetrate the wire.

Different IP Ratings

The rating consists of the letters IP followed by two digits, the higher the number the better the protection. The first digit indicates the level of protection that the enclosure provides against the ingress of solid foreign objects while the second digit defines the protection of the equipment inside the enclosure against various forms of moisture (drips, sprays, submersion, etc).

How to get IP testing certificate?

To get an IP rating for your product, you need to provide a product sample for testing. CDG will conduct independent testing & assessment of your product. After testing & assessment, we give the product a numerical IP rating, based on the tests we have put it through.

The value of trusting CDG with your Ingress Protection (IP) testing is clear. Working with our leading Engaged Experts and an unrivalled portfolio of testing operations and capacities enables our clients to validate certainty in their products and confidence to go to market quickly and safely, working with a global single source partner.

Additional Information:

• Delivery Time: 15 days

Service Details:

 CDG can provide Accredited ‘ingress protection’ Certification.

Devices backed by an international standard rating of IP68 are deemed fit enough to withstand dust, dirt and sand, and are resistant to submersion up to a maximum depth of 1.5m underwater for up to thirty minutes.

The Ingress Protection rating (IP Rating) system is a classification system that in a nutshell, provides you with the levels of protection you’re receiving from solid objects and liquids. The standard aims to provide users with more detailed information than vague marketing terms such as waterproof.

In a perfect world, every device will be able to withstand sand, dust, and water to some extent, not all devices. The Ingress Protection rating classification system, for solid objects and liquids.

 

The basic standards for IP rating are IS/IEC 60529. The standard aims to provide users with more detailed information than vague marketing terms such as waterproof. The first digit represents protection against ingress of solid objects, while the second digit represents protection against ingress of liquids; the higher the value, the greater the protection.

 

The Degree of Protection provided by an enclosure is indicated by the IP coding such as IPXXCH

IP – IP is the Code letters

X – First Characteristics numeral – Dust Protection (numerals 0-6 or latter X)

X – Second Characteristics numeral – Water Protection (numeral 0-8 or latter X)

C – Additional Letter – optional, letters A, B, C, D

H – Supplementary letters – optional, letters H, M, S, W

Applicable Standard: IS/IEC 60529.

First digit: 6Definition: Dust must not enter at all.Test conditions: The test is carried out in a dust chamber in which talcum powder is being kept suspended in the air by means of a dust distributor or similar device. The enclosure which is being tested is placed in the test chamber while a vacuum pump keeps the pressure in the enclosure below the atmospheric pressure of the environment according to the standard.Conditions for acceptance: The protection is satisfactory if there is no visible dust deposit within the enclosure after completion of the test.

Second digit: 8Definition: Water must not enter in a quantity that could have harmful effects if the enclosure is kept under water under conditions agreed between the manufacturer and the user; however, these must be more difficult than those under Fig. 7. IP X8Test conditions: The enclosure is completely immersed in a water basin. The immersion depth as well as the test time are dependent on the conditions agreed on between manufacturer and user.In our in-house test laboratory we can test up to a maximum immersion depth of 1.2 metres.Conditions for acceptance: Should water have penetrated, it must not- be present in quantities which impair the good working order of the operating material or represent a safety hazard;- deposit on non-conducting parts where it could lead to creep currents;- come in contact with live parts or coils which are unsuitable for operating in wet conditions;- collect near the wire end or possibly penetrate the wire.

Additional Information:

• Delivery Time: 15 Days

Service Details:

CDG is a leading ‘Ingress Protection Testing’ company in India, contact us for ‘Ingress Protection Testing Services’.

EN 60529 outlines an international classification system for the sealing effectiveness of enclosures of electrical equipment against the intrusion into the equipment of foreign bodies (i.e. tools, dust, fingers) and moisture.

This classification system utilizes the letters “IP” (“Ingress Protection”) followed by two or three digits. (A third digit is sometimes used. An “x” is used for one of the digits if there is only one class of protection; i.e. IPX4 which addresses moisture resistance only.)

Ingress Protection testing, or IP testing, tests a product’s ability to protect against “ingress,” that is, the infiltration of water, dust and foreign objects. Evaluate the Degree of Protection Provided by a Product’s Enclosure with Ingress Testing from CDG. CDG is a leading ‘Ingress Protection Testing’ company in India, contact us for ‘Ingress Protection Testing Services’.

The first digit of the IP code indicates the degree that persons are protected against contact with moving parts (other than smooth rotating shafts, etc.) and the degree that equipment is protected against solid foreign bodies intruding into an enclosure.

• Drip Box The drip box is for IPX1 and IPX2 drip test. The drip box size is 800x800x75mm (LxWxH). The diameter of drip hole is 0.4mm. The distance between drip holes is 20mm. The sample can be over 150kg.

• Swing Pipe Water Spray Test Equipment: It is for IPX3 and IPX4 waterproof test. The semi-diameter of swing pipe is 1meter (Any other size is also available). The inside diameter of the swing pipe is 15mm. The sample rotating table diameter is 1000mm (Or other size according to the diameter of the swing pipe), and the height is adjustable. The rotation speed is 1~5rpm which controlled by PLC panel.

• Waterproof Jet Test Device: With water supply device size is 1000x1000x600mm, the nozzle diameter is ??6.3mm (IPX5 waterproof test) and ??12.5mm (IPX6 waterproof test). The water speed is 12.5 ±0.626L/min for IPX55 and 100 ±5L/min for IPX6

• Immersion tank Waterproof test Device : It is for IPX7 waterproof test. The water tank size is 1000x1000x1200mm (Other size can be designed according to your request). It can test samples up to 120kg.

• Immersion tank Waterproof test Device : It is for IPX8 test. It can simulate a water depth of 0~50m. The water immersion tank diameter is 600mm and the height is 1200mm. The compressive stress is 10 atmospheres or design according to customer‘s request.

1 – Protection from a large part of the body such as a hand (but no protection from deliberate access); from solid objects greater than 50mm in diameter.

2 – Protection against fingers or other object not greater than 80mm in length and 12mm in diameter.

 3 – Protection from entry by tools, wires, etc., with a diameter of thickness greater than 1.0mm.

 4 – Protection from entry by solid objects with a diameter or thickness greater than 1.0mm

 5 – Protection from the amount of dust that would interfere with the operation of the equipment.

 6 – Dust tight.

 

Additional Information:

• Delivery Time: 15 Days

Service Details:

CDG is an accredited laboratory for IP66 certification in India / IP66 testing in India.
IP66 Ingress Protection Testing And Certification  
IP66 Testing Labs offers a full range of IP66 Testing services. We have fully equipped to test and approve a wide range of electrical products and equipment for organizational and governmental certifications, from battery chargers and lighting equipment to medical electrical equipment and wireless devices. 
IP66 Enclosure – IP rated as “dust tight” and protected against heavy seas or powerful jets of water.  
IP66 Defining Characteristics: 
Complete protection from dust, oil, and other non-corrosive material 
Complete protection from contact with the enclosed equipment 
Protection from water, even from powerful jets of water 
Engraving, silk-screening, and anodizing services available 
Custom with cutouts, insulation, hinges, latches or locks  
IP66 WATER 
1. Protected against vertically falling drops of water. Limited ingress permitted. 
2. Protected against vertically falling drops of water with enclosure tilted up to 15 degrees from the vertical. Limited ingress permitted. 
3 Protected against sprays of water up to 60 degrees from the vertical. Limited ingress permitted for three minutes. 
4. Protected against water splashed from all directions. Limited ingress permitted. 
5. Protected against jets of water. Limited ingress permitted. 
6. Water from heavy seas or water projected in powerful jets shall not enter the enclosure in harmful quantities. 
7. Protection against the effects of immersion in water between 15 cm and 1 m for 30 minutes. 
8. Protection against the effects of immersion in water under pressure for long periods. 
IP66 SOLIDS 
1. Protected against a solid object greater than 50 mm 4pr A-.1 such as a hand. 
2. Protected against a solid object greater than 12.5 mm such as a finger. 
3. Protected against a solid object greater than 2.5 mm such as a screwdriver. 
4. Protected against a solid object greater than 1 mm such as a wire. 
5. Dust Protected. Limited ingress of dust permitted. Will not interfere with the operation of the equipment. Two to eight hours. 
6. Dust-tight. No Ingress of dust. Two to eight hours. 
Why choose CDG for IP65 Testing? 
We are a leading provider of comprehensive testing services for electrical and LED lighting products. Our global network of technical experts, combined with our state-of-the-art testing laboratories, assure a single source solution for meeting all applicable requirements, standards and voluntary schemes. And technical professionals are actively involved in international advisory boards and standards development activities, ensuring the most up to date knowledge of current and changing requirements. 
We are a unique entity in the industry, actively committed towards offering an optimum quality IP66 Certification Services. This service is widely acknowledged by our precious clients owing to its promptness and cost-effectiveness features. Our skilled professionals provide this service in the best possible manner. The provided service is executed by our adept professionals using optimum quality tools and latest technology. Moreover, our precious clients can avail this service from us at most reasonable price.

Service Details:

CDG is an accredited laboratory for IP65 certification in India / IP65 testing in India.

IP65 Testing And certification IP Enclosure Ratings and Standards Explained The IP rating is also known as Ingress Protection or International Protection ratings which are defined to the international standard of EN 60529, BS EN 60529:1992, IEC 60509:1989. These standards are used to define the levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies such as dirt and water. 
The rating consists of the letters IP followed by 2 digits, the first digit stands for the level of protection that the enclosure provides against solid bodies, the second digit describes the degree of protection of the equipment inside the enclosure against water. 
IP65 = First Digit – Solids IP65 = Second Digit – Liquids  
What is ip65 enclosure? IP65 Enclosure – IP rated as “dust tight” and protected against water projected from a nozzle. IP66 Enclosure – IP rated as “dust tight” and protected against heavy seas or powerful jets of water. IP 67 Enclosures – IP rated as “dust tight” and protected against immersion.  
Is ip65 waterproof? Example: With an IP65 rating, the LEDs can be used in an outside setting and are water-resistant but they are not waterproof and are not suitable to be submerged. An IP68 can be submerged in water.  
What are ip65 standards? At CDG, we utilize the IEC’s standardized International Protection Code system for measuring enclosures’ capabilities. The IP Code reflects the degree of protection as “IP” followed by two numbers; the first digit shows the extent to which enclosures are protected against particles and protection to others from enclosed hazards. The second digit indicates the extent of protection against water. We carry IP65 enclosures which offer complete protection against particles, and a good level of protection against water. IP65 Enclosures’ Characteristics: Complete protection from dust, oil, and other non-corrosive material Complete protection from contact with the enclosed equipment Protection from water, up to water projected by a nozzle against enclosure from any direction Silk-screening, anodizing, or engraving services available Custom with cutouts, insulation, hinges, latches or locks IP 65 Standards for Electrical Enclosure Protection

Is ip65 suitable for outdoor use? Waterproof Wall Lights for Outdoor Lighting. There is a wide range of wall lights, but not all can be used outdoors; it is recommended to install a wall fitting that is at least IP44 rated so that water would not reach the electricals, or even an IP65 or IP67 waterproof fitting (to be more secure). 
Why choose CDG For IP65 Testing? CDG is a leading provider of comprehensive testing services for electrical and LED lighting products. Our global network of technical experts, combined with our state-of-the-art testing laboratories, assure a single source solution for meeting all applicable requirements, standards and voluntary schemes. And CDG technical professionals are actively involved in international advisory boards and standards development activities, ensuring the most up to date knowledge of current and changing requirements. 
CDG has an unsurpassed track record of meeting and exceeding the requirements and expectations of our client companies. The CDG brand and our distinctive blue octagon mark are instantly recognized around the globe as symbols of quality and safety Testing and will increase customer confidence in your brand. 
CDG can assist companies in low-cost life testing and evaluating of their products for pre-compliance and compliance testing to schemes such as The Carbon Trust Enhanced Carbon Allowance.

Service Details:

CDG is an accredited laboratory for IP55 certification in India / IP55 testing in India.

What is the IP certification? IP certifications stand for Ingress Protection, or simply put, how well protected a device is against the ingress or entering of solid or liquid particles. While calling particular gadgets water-resistant or waterproof may sound convenient, it may also end up being vague.  
How to Get IP55 Testing and Certification for Electrical Panel?  Here is the process of Getting IP55 Testing and Certification for the Electrical Panel. We can do Electrical Panel IP55 Testing as per IEC EN 60529 Standard 
Two types of IP55 Testing: 
IP55 Dust proof Testing and 
IP55 Rainproof/waterproof Testing 
Test method for IP55 Dustproof Testing: 
Electrical Panel tested in a dust chamber, in which talcum powder is maintained in suspension by an air current. The chamber shall contain 2 kg of powder for every cubic meter of its volume. The talcum powder used shall be able to pass through a square-meshed sieve whose nominal wire diameter is 50 u m and whose nominal free distance between wires is 75 u m. It shall not have been used for more than 10 tests. 
Test method for IP55 Rainproof/Waterproof Testing: 
Test for second characteristic numeral 5 with the 6.3mm nozzle. 
The test is made by spraying the enclosure from all practicable directions with a stream of water from a standard nozzle. 
The conditions to be observed are as follows: The internal diameter of the nozzle 6.3mm 
Delivery rate: 12.51/min±5% 
Water pressure: to be adjusted to achieve the specified delivery rated 
The core of the substantial stream circle of approximately 40mm diameter at 2.5m distance from the nozzle 
Test duration per square meter of enclosure surface area likely to be sprayed: 1 min 
Minimum test duration 3minuts 
Distance from the nozzle to enclosure surface between 2.5m and 3m. 
 What is the duration or Time periods of IP55 Testing for Electrical Panel? 
·         You will get a test report within a week 
 What is the Test Equipment used for IP 55? 
The instrument used for IP Dustproof Testing: Sand and dust test chamber. 
The instrument used for IP Waterproof /Rainproof Testing: Rain test chamber. 
IP 55 Enclosure Characteristics: 

• Protection from dirt, dust, oil, and other non-corrosive material. 
• Complete protection from contact with enclosed equipment. 
• Protection from water, up to water projected by a nozzle against enclosure from any direction. 
• Available in aluminum, carbon steel, and stainless steel. 
• Available in wall-mounted, free standing, trough, and JIC box. 
• Engraving, silk-screening, or anodizing services available. 
• Custom with cutouts, insulation, hinges, latches, or locks.